iTeh StandardsiTeh Standards
  • Dashboard
  • Catalog
    • Packages
    • Latest Standards
    • Advanced Search
    • Browse Catalog
    • ISO StandardsISO Standards
    • IEC StandardsIEC Standards
    • CEN StandardsCEN Standards
    • CENELEC StandardsCENELEC Standards
    • SIST StandardsSIST Standards
    • ETSI StandardsETSI Standards
  • Knowledge Center
  • Blog

Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system

This Part of EN 573 specifies a code of designation applicable to aluminium and aluminium alloys as specified in the relevant European Standards. It is a descriptive code based primarily on chemical symbols. The designations in accordance with this Part of EN 573 are intended primarily as a supplement to the four figure designation described in EN 573-1. This standard applies to wrought products and to ingots intended to be wrought.

Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von Halbzeug - Teil 2: Bezeichnungssystem mit chemischen Symbolen

Diese Europ盲ische Norm legt einen Bezeichnungsschl眉ssel f眉r Aluminium und Aluminium-Knetlegierungen fest, die in den entsprechenden Europ盲ischen Normen aufgef眉hrt sind. Er ist ein beschreibender Schl眉ssel, dessen Grundlage in erster Linie die chemischen Symbole sind. Die Bezeichnungen nach dieser Norm sind haupts盲chlich als Erg盲nzung zu dem numerischen Bezeichnungssystem (4 Ziffern) vorgesehen, welches im Teil 1 dieser Norm beschrieben ist. Wenn die Bezeichnung mit chemischen Symbolen angewendet wird, ist sie in eckigen Klammern nach der numerischen Bezeichnung vorzunehmen.

Aluminium et alliages d'aluminium - Composition chimique et forme des produits corroy茅s - Partie 2: Syst猫me de d茅signation fond茅 sur les symboles chimiques

La pr茅sente partie de l'EN 573 d茅crit un code de d茅signation applicable 脿 l'aluminium et aux alliages d'aluminium tels que sp茅cifi茅s dans les Normes Europ茅ennes s'y rapportant. C'est un code descriptif fond茅 principalement sur les symboles chimiques. Les d茅signations en accord avec cette partie de l'EN 573   sont destin茅es principalement 脿 compl茅ter la d茅signation 脿 quatre chiffres d茅crites dans l'EN 573-1. Cette norme s'applique aux produits corroy茅s, et aux plaques et billettes destin茅es 脿 锚tre corroy茅es.

Aluminij in aluminijeve zlitine - Kemi膷na sestava in oblika gnetenih izdelkov - 2. del: Sistem ozna膷evanja s kemijskimi simboli

General Information

Status
Published
Publication Date
29-Aug-1994
Withdrawal Date
27-Feb-1995
ICS
77.040.30 - Chemical analysis of metals
Technical Committee
CEN/TC 132 - Aluminium and aluminium alloys
Drafting Committee
CEN/TC 132/WG 7 - Sheets, strips and plates
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2023
Completion Date
02-Dec-2023
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 573-2:1998 - Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system

Buy Standard

EN 573-2:1998EN 573-2:1998
Previous Next
Standard
EN 573-2:1998
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 573-2:1998
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH.HPL镁QDVHVWDYDLQREOLNDJQHWHQLKL]GHONRY
GHO6LVWHPR]QD镁HYDQMDVNHPLMVNLPLVLPEROL
Aluminium and aluminium alloys - Chemical composition and form of wrought products -
Part 2: Chemical symbol based designation system
Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von
Halbzeug - Teil 2: Bezeichnungssystem mit chemischen Symbolen
Aluminium et alliages d'aluminium - Composition chimique et forme des produits
corroy茅s - Partie 2: Systeme de d茅signation fond茅 sur les symboles chimiques
Ta slovenski standard je istoveten z: EN 573-2:1994
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 573-2:1998 en
2003-01.Slovenski in拧titut za standard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14242:2023(Main)
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
SIST EN 14242:2023

This document specifies an inductively coupled plasma optical emission spectrometric method
(ICP-OES) for the analysis of aluminium and aluminium alloys.
This method is applicable to the determination of silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, titanium, gallium, vanadium, beryllium, bismuth, calcium, cadmium, cobalt, lithium, sodium, lead, antimony, tin, strontium and zirconium in aluminium and aluminium alloys.
The content of the elements to be determined should be at least 10 times higher than the corresponding detection limits.

CEN
EN 14726:2019(Main)
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
SIST EN 14726:2019

This document describes the criteria and the procedure for analysing aluminium and aluminium alloys with spark optical emission spectrometry (S-OES). The scope of this document covers the following:
-   sample preparation;
-   operational guidelines for an optical emission spectrometer (including maintenance);
-   traceability of the analytical results to the International System of units: mass (kg);
-   assessing the uncertainty associated with each analytical result.
This document refers to simultaneous spark emission spectrometers for the analysis of solid samples.
It applies to the determination of silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, titanium, boron, gallium, vanadium, beryllium, bismuth, calcium, cadmium, cobalt, lithium, sodium, phosphorus, lead, antimony, tin, strontium and zirconium in aluminium and aluminium alloys.
Elements other than those listed above may be analysed on the condition that:
a) suitable reference materials are available; and
b) the instrument is suitably calibrated and equipped.
In the case of determining mercury, for compliance purposes an alternate method with a limit of quantification < 0,000 1 % is recommended as its detection is compromised by intense iron interference at 253,65 nm.
The test result obtained from a spark optical emission spectrometer generally concerns an amount of less than one milligram per spark spot. The result can be used to refer to the laboratory test sample, to the aluminium or aluminium alloy melt or to the cast product.

CEN
EN 573-5:2007(Main)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
SIST EN 573-5:2007

This document specifies the codification of some standardized semifinished wrought products for use in ordering information.
NOTE   Codification is usually required for technical drawings.
It does not apply to castings, cast forging stock, rolling ingots, extrusion billets and ingots for remelting.

CEN
EN 12258-2:2004(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis
SIST EN 12258-2:2005

This European Standard defines general terms which are helpful for the communication within the aluminium industry and its customers relating to the chemical analysis.
A glossary (annex A) comprises all terms in alphabetical order which are defined in this standard.
NOTE   Most of the definitions are taken from or closely adapted to ISO standards and/or VIM.

CEN
EN 14361:2004(Main)
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
SIST EN 14361:2005

This document specifies criteria for sampling and gives guidance on the sampling from melts in order to verify if the chemical composition of the product fabricated from a metal melt is in conformance with the
specification.
NOTE   For sampling from product or laboratory samples see EN 14242 or prEN 14726.

CEN
prEN 14361(Main)
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
oSIST prEN 14361:2024

This document specifies criteria for sampling and gives guidance on the sampling from melts in order to verify if the chemical composition of the product fabricated from a metal melt is in conformance with the specification.
NOTE   For sampling from product or laboratory samples see EN 14242 or EN 14726.

CEN
EN ISO 6306:2023(Main)
Chemical analysis of steel - Order of listing elements in steel standards (ISO 6306:2020)
SIST EN ISO 6306:2023

This document specifies an order for listing elements within the chemical composition of steels and most other iron-based alloys, excluding foundry irons.

CEN
CEN/TR 10377:2023(Main)
Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry
SIST-TP CEN/TR 10377:2023

X-ray Fluorescence Spectrometry (XRF) has been used for several decades as an important analytical tool for production analysis. XRF is characterised by its speed and high precision over a wide concentration range and since the technique in most cases is used as an relative method the limitations are often connected to the quality of the calibration samples. The technique is well established and most of its physical properties are well known.

CEN
CEN/TR 10261:2023(Main)
Iron and steel - European standards for the determination of chemical composition
SIST-TP CEN/TR 10261:2023

This document lists, under Clause 4, the European Standards which are currently available for the determination of the chemical composition of steels and cast irons.
In Clause 5, this document provides details on the range of application and gives the principle of the method described in each standard.
Items which are under preparation as European Standards or as CEN Technical Reports by ECISS/TC 102 are available on the webpage of CEN, through the  following link: https://standards.cen.eu/dyn/www/f?p=204:22:0::::FSP_ORG_ID:733643&cs=123E58BF77E3DE921F548B80C5FF2E5D4.
Annex A gives a list of other European Standards and CEN Technical Reports applicable for the determination of the chemical composition of steels and cast irons.
Annex B gives a list of withdrawn Euronorms, together with the corresponding replacement European Standards, if any.
Annex C shows graphical representations of the content ranges of the methods listed in this document. Figure C.1 gives the content ranges of the referee methods, Figure C.2 gives the content ranges of the routine methods and Figure C.3 represents the fields of application of all the methods described.
Annex D provides a trilingual key of the abbreviations used in the Figures given in Annex C.
NOTE   Three methods applicable for the analysis of some ferro-alloys are listed in Annex A.

CEN
EN 14242:2023(Main)
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
SIST EN 14242:2023

This document specifies an inductively coupled plasma optical emission spectrometric method
(ICP-OES) for the analysis of aluminium and aluminium alloys.
This method is applicable to the determination of silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, titanium, gallium, vanadium, beryllium, bismuth, calcium, cadmium, cobalt, lithium, sodium, lead, antimony, tin, strontium and zirconium in aluminium and aluminium alloys.
The content of the elements to be determined should be at least 10 times higher than the corresponding detection limits.

两个鬼故事自助火锅加盟历史姓女孩起洋气的名字中国历史地图集电子教室bl肉肉很多的糙汉文公司如何起名网易给排水宋轶怎么读天龙八部2021演员表洛希极限小说字典起名常用字rtsy电脑风扇声音大怎么办魔兽作弊地图园林工程公司起名字起名 带海字的名字silverdaddies马氏女宝起名大全重启末世子扬起名的含义是什么teechart给新生儿起名字姓罗morphvoxpro台湾电视台ff10攻略蜇猪猪侠大电影足球越位清网行动演员表生鲜店取名起名大全少年生前被连续抽血16次?多部门介入两大学生合买彩票中奖一人不认账让美丽中国“从细节出发”淀粉肠小王子日销售额涨超10倍高中生被打伤下体休学 邯郸通报单亲妈妈陷入热恋 14岁儿子报警何赛飞追着代拍打雅江山火三名扑火人员牺牲系谣言张家界的山上“长”满了韩国人？男孩8年未见母亲被告知被遗忘中国拥有亿元资产的家庭达13.3万户19岁小伙救下5人后溺亡 多方发声315晚会后胖东来又人满为患了张立群任西安交通大学校长“重生之我在北大当嫡校长”男子被猫抓伤后确诊“猫抓病”测试车高速逃费 小米：已补缴周杰伦一审败诉网易网友洛杉矶偶遇贾玲今日春分倪萍分享减重40斤方法七年后宇文玥被薅头发捞上岸许家印被限制高消费萧美琴窜访捷克 外交部回应联合利华开始重组专访95后高颜值猪保姆胖东来员工每周单休无小长假男子被流浪猫绊倒 投喂者赔24万小米汽车超级工厂正式揭幕黑马情侣提车了西双版纳热带植物园回应蜉蝣大爆发当地回应沈阳致3死车祸车主疑毒驾恒大被罚41.75亿到底怎么缴妈妈回应孩子在校撞护栏坠楼外国人感慨凌晨的中国很安全杨倩无缘巴黎奥运校方回应护栏损坏小学生课间坠楼房客欠租失踪 房东直发愁专家建议不必谈骨泥色变王树国卸任西安交大校长 师生送别手机成瘾是影响睡眠质量重要因素国产伟哥去年销售近13亿阿根廷将发行1万与2万面值的纸币兔狲“狲大娘”因病死亡遭遇山火的松茸之乡“开封王婆”爆火：促成四五十对奥巴马现身唐宁街 黑色着装引猜测考生莫言也上北大硕士复试名单了德国打算提及普京时仅用姓名天水麻辣烫把捣辣椒大爷累坏了

两个鬼故事 XML地图 TXT地图 虚拟主机 SEO 网站制作 网站优化