Package Dimensions | 13 x 7.5 x 2.8 cm; 40 g |
---|---|
Batteries required | No |
Image Unavailable
Colour:
-
-
-
- To view this video download Flash Player
- VIDEOS
- 360° VIEW
- IMAGES
Driver Module, DC 12V 24V 48V 2 Channel PWM 4-Wire Fan Temperature Controller Speed Governor Display Module for PC Fan/Alarm
Return this item for free
Free returns are available for the shipping address you chose. For a full refund with no deduction for return shipping, you can return the item for any reason in new and unused condition.
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Colour | grey|green|white|black |
Brand | DONGKER |
UPC | 779207141556 |
Manufacturer | AILOVA |
About this item
- It is a PWM 4-Wire Fan Temperature Controller.It has a temperature and speed display and a stall alarm.
- Digital display.Wide operating voltage.Dual independent temperature control.Support button setting.Stall alarm function
- Speed Resolution:10rpm at >9990rpm(the display show "999") .Speed measurement is designed according to common 2-pole signal fans, most fans are 2-pole signals.
- This product is not limited by the fan current,but the pin current of the fan interface on the board should not be greater than 3A.If you use a higher current fan,please connect the fan power cord directly to the main power.
- SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please feel free to contact us.We will provide after-sales service until you are satisfied.
Buy it with
What do customers buy after viewing this item?
- Lowest Pricein this set of productsModulia DC 12V 5A PWM PC CPU Fan Temperature Control Speed Controller Board Speed Controller Temperature Probe Buzzle4.7 out of 5 stars 5£6.99£6.99
- Highest ratedin this set of productsNoctua NA-SEC3, 4-pin Fan Extension Cables (60cm, Black)4.8 out of 5 stars 299£8.95£8.95
- RUNCCI-YUN 3Pcs USB Fan Speed Controller, DC 5V Stepless Mini USB Fan Governor DC 4-12V to 2.5-8V 5W Regulator Speed Control Knob with Switch4.4 out of 5 stars 1,062£6.99£6.99
- PC Fan Speed Controller PWM Governor, 4Pin Fan DC 12V 0-99.99% Adjustable Fan Adapter PWM PC Chassis Cooling Fan Hub for 8pcs Fan3.1 out of 5 stars 10£6.99£6.99
- Driver Module, 12V DC 24V 48V PWM 4 Wires Fan Temperature Speed Control Governor Display Module Driver for PC Fan/Alarm4.0 out of 5 stars 64£12.99£12.99
- Noctua NA-FC1, 4-Pin PWM Fan Controller (Black)4.6 out of 5 stars 2,168£21.95£21.95
- PWM Fan Speed Controller, DC 12V Four Wire Thermostat PWM Fan Speed Controller Governor Module for PC (mainboard + small speaker + probe)4.2 out of 5 stars 72£7.57£7.57
- ARCTIC F12 PWM PST (5 Pack) - PC Fan, 120mm Case Fan with PWM Sharing Technology (PST), Quiet motor, Computer, Fan Speed: 230-1350 rpm - Black4.7 out of 5 stars 3,341£27.09£27.09
- JZK Digital PWM Driver Module, DC 12V 24V 48V PWM 4-Wire Fan Temperature Controller Speed Governor Display Module for PC Fan, PWM Temp Module3.3 out of 5 stars 5£9.29£9.29
Product description
Description:
It is a step up down power supply module. It can be used as a power source.
Feature:
1>The working voltage must be equal to the fan voltage.If you use a 12V fan but supply 24V,it will burn the fan.
2>.Under normal working conditions,the four values will be displayed in turn.You can quickly switch the value manually by pressing the + Button and - Button at any time.After manual switching,you will stay at this value for a long time before entering the wheel display state.You can shield the display of channel 2 as needed.
Parameter:
1>.Work Voltage:DC 8V~60V.
2>.Control Board Working Current:35mA(12V),22mA (24V).
3>.Control Output Range:10%~100% .
4>.Temperature Probe Specification:NTC 10KB=3950.
5>.Temperature Measurement:-9.9℃~99.9℃.
6>Acceleration Temperature:5℃~94℃.
Package:
1 x PWM 4-Wire Fan Temperature Controller
1x Buzzer
1x NTC Temperature Sensor
Product information
Technical Details
Additional Information
ASIN | B083R97GZ1 |
---|---|
Manufacturer reference | 117 |
Date First Available | 11 Jan. 2020 |
Customer Reviews |
4.2 4.2 out of 5 stars
49 ratings
4.2 out of 5 stars |
Best Sellers Rank | 16,656 in Business, Industry & Science ( See Top 100 in Business, Industry & Science) 65 in Motor Speed Controllers |
Feedback
Looking for specific info?
Compare with similar items
This item DONGKER Driver Module, DC 12V 24V 48V 2 Channel PWM 4-Wire Fan Temperature Controller Speed Governor Display Module for PC Fan/Alarm | Recommendations Taikuwu PC Fan Governor, DC 12V Four Wire Thermostat PWM Fan Speed Controller Governor Module for PC | dummy Hilitand DC 12V PWM Fan Controller, Four Wire Thermostat PWM Fan Speed Controller Governor Module Temperature Relay For PC | dummy DollaTek 12V DC PWM 2-3 Wire Fan Temperature Control Speed Controller Noise Reduction Module | dummy Youmile Thermostat PWM Fan Module, PC Fan Temperature Speed Controller Governor CPU High Temperature Cooling Module 4 Wire 3 Channels DC 12V NTC 50K Thermal Sensor/Buzzer Alarm sounder Module | dummy YWBL-WH PWM Fan Speed Controller, DC 12V Four Wire Thermostat PWM Fan Speed Controller Governor Module for PC (mainboard + small speaker + probe) | |
Try again! Added to Basket | Try again! Added to Basket | Try again! Added to Basket | Try again! Added to Basket | Try again! Added to Basket | Try again! Added to Basket | |
Price | £13.99£13.99 | £7.49£7.49 | £6.94£6.94 | £4.99£4.99 | £7.29£7.29 | £7.57£7.57 |
Delivery | Get it as soon as Thursday, Jun 20 | Get it as soon as Thursday, Jun 20 | Get it as soon as Thursday, Jun 20 | — | Get it as soon as Thursday, Jun 20 | Get it as soon as Thursday, Jun 20 |
Customer Ratings | 4.24.2 out of 5 stars49 | 3.53.5 out of 5 stars4 | 4.44.4 out of 5 stars66 | 3.83.8 out of 5 stars42 | 4.34.3 out of 5 stars57 | 4.24.2 out of 5 stars72 |
Sold by | AILOVA | Taikuwu | Muxizac | DollaTek | YoumileDirect | Kerindas |
Customer reviews
5 star | | 67% |
4 star | | 14% |
3 star | | 5% |
2 star | | 4% |
1 star | | 11% |
Our goal is to make sure that every review is trustworthy and useful. That's why we use both technology and human investigators to block fake reviews before customers ever see them. Learn more
We block Amazon accounts that violate our Community guidelines. We also block sellers who buy reviews and take legal actions against parties who provide these reviews. Learn how to report
-
Top reviews
Top reviews from United Kingdom
There was a problem filtering reviews right now. Please try again later.
Took me a simple google search to find the manual online. Few things not quite what I expected, but it was fairly obvious once you realise how the buttons work.
Google "GY17493", it was the top of the list for me, a pdf file on "aliyuncs".
If you read the manual, it will work how you expect!
Next... it is wired for a regular PWM fan with black, red, yellow, blue (-,+, taco, pwm)
You set the fan speed to test, then the temp low and high... when it is higher than the set temp, the fan goes on and increases to 100% when it reaches the high temp.
So it does the main job of fan on when too hot, incease fan speed as it gets hotter!
If you dont need two channels, you can turn off channel 2.
Yes the leds are a little bright, but that's not a show stopper... just put some opaque masking tape over the leds and you can then control the brightness the old fashioned way.
Setting Description:
1. Basic speed settings: basic speed setting for adjusting fan speed before temperature control is started, which is the fan speed when it is lower than the accelerating speed temperature. Setting method: press the "OK" button in any operating state and at the moment, channel 1_two LEDs light up at the same time horizontally with LED display showing current setting value (10-100); set the size by pressing the “+”&“-”
button and long-press the button to do continuous modification; press “OK” button after the previous setting; enter into channel 2’s basic speed setting; using the same method to do the setting and after the setting, press “OK” button to save it and exit.
2. Temperature control zone and stop-rotating alarm settings: under normal operating state, long-press “OK” button until the display is L**(**is digit value); release the button; channel 1_two LEDs lighting up at the same time horizontally stands for being in channel 1’s accelerating speed temperature setting status; set the digit value (range 5-94, unit: centigrade) by pressing the “+”&“-”button; after the setting press “OK” button to enter into channel 1 full speed temperature status displaying “H**” ; set the amount by the same way (range 10-99, unit: centigrade); after the setting press “OK” button to enter into channel 1 stop-rotating alarm setting; “+”&“-”button setting; “boF” stands for stopping the channel stop-rotating alarm; “boN” stands for starting the channel stop-rotating alarm; after the setting press “OK” button to enter into channel 2’s digit value setting with the same quickly and setting method as the channel 1 did. After the above setting, press “OK” button to exit and save the parameters.
3. Channel 2 displays blocking setting: in control panel power-off state, keep pressing “OK” button to power up it with LED display showing “2on” (starting channel 2 display) or “2oF” (blocking channel 2 display); release “OK” button; set switch blocking by pressing “+”&“-”button; after the setting, press “OK” button again to exit and enter into the normal operating status.
4. Normal and reverse l0gic mode switch (newly added): disconnect the fan; under controller not being powered up status, at the same time press (keep pressing) “+”&“-” button to power up the controller; at the moment, controller enters into mode choosing status; release the button; press “+”&“-” button again to switch mode: displaying “F-1” is normal mode and displaying “F-2” is reverse l0gic mode; after the modification, press “OK” button to exit (automatically being saved when exiting) the setting.
Setting Note:
1. at speed and temperature zone setting state, if it stays more than 15 seconds without operation, it will automatically exit without saving any data.
2. when the temperature zone is set, the same channel full speed temperature must be higher than its acceleration speed temperature at least 5 degrees centigrade; when you set a temperature digit value not meeting this conditions, the controller will automatically adjust another temperature digit value to ensure the conditions; this is an automatic one-way adjustment and if you need to adjust back, please manually adjust another temperature digit value.
3. channel 2 blocking display settings only affect working status data display and do not affect control and parameter setting (it can work normally).
SIDE NOTE: Using 4 x High Performance Noctua NF-P14s redux-1500 PWM Fans you do notice a Speed drop when setting them to 100% due to the power output from this module i assume as this modules Power Output is lower than the 4 Fans can use.
Can someone please guide me where I’m going wrong.
Note* these are not set up in a computer but a cooling system for a DC-DC charger
Haven't connected it all up yet but build quality seems really good; soldering good, component positions consistent, connectors solid. Sensors and buzzer a bit rudimentary but suits the price-point and will be hidden anyway. Found a Youtube video that was reassuring in how it demonstrated usage. Very happy overall.
See more reviews
Top reviews from other countries
Reviewed in Germany on 7 March 2024
Die Mindest- und Höchsttemperatur (H: High/Max, L: Low/Min) für die Drehzahlregulierung lässt sich einstellen, wenn man die OK-Taste für einige Sekunden gedrückt hält. Das Prinzip dürfte von diversen anderen Geräten (Monitore, TV, Backofen) bekannt sein: +/- um den Wert einzustellen, OK um zum nächsten Wert zu gelangen. Als letztes lässt sich auch der Warnton ein- oder ausschalten (on/off). Dieser scheint unabhängig der Temperatur zu erklingen, sobald der Lüfter still steht bzw. nicht mehr angeschlossen ist - dabei ist zu beachten, dass bei der Nutzung von Y-Verbindern (um mehrere Lüfter am gleichen Ausgang anzuschließen) immer nur ein Lüfter seine Drehzahl übermitteln kann und so ggf. einzelne Lüfter ausfallen können, ohne dass ein Ton erklingt. Der Warnton ist erfreulich angenehm, für manche Einsatzzwecke (vor allem im Gehäuseinneren) aber vllt. zu leise und unaufdringlich. Ich konnte keine Möglichkeit finden, den Warnton für die Überschreitung einer Maximaltemperatur zu nutzen, dafür gibt es aber inzwischen genügend Smart-Home-Lösungen, die dabei helfen können.
Ich habe die Steuereinheit für den Betrieb von 4 PC-Lüftern zur Kühlung eines Netzwerkschranks gekauft und um ein Gehäuse, Stromanschluss über DC-Buchse und einen Ein/Aus-Schalter ergänzt. Einziger Nachteil an diesem Modell für mich ist der zweite Lüfteranschluss, der über einen zweiten Temperaturfühler gesteuert wird, was in diesem Fall eigentlich redundant ist. Leider zeigt die Anzeige im Wechsel auch die Werte für Ein- und Ausgänge, an denen nichts angeschlossen ist. Dafür sind die 4-Kanal-Buchsen von Haus aus mit gängigen PC-Lüftern kompatibel, was bei Steuereinheiten mit nur einem Lüfter anscheinend nur selten der Fall ist.
Laufen durchgehend mit 3300 Umdrehungen
See more reviews